Sitemap
Languages
Login & Registration
Home
TMPGEnc MPEG Editor 3
Downloads
- Frame-Level HD MPEG Editing Software
- Latest Version: 3.1.1.95
- For Windows XP SP2 / Vista / Vista SP1 / 7
- This page is for the English version. Also available in Japanese.
Secondary Overseas Server
TMPGEnc MPEG Editor 3 Trial Version 3.1.1.95
| File Name: | TME3_Trial_3.1.1.95_setup_en.exe |
| File Size: | Size: 23.8 MB (25,048,256 bytes) |
| Date Updated: | 2009.4.21 |
- Important Information:
- This software is a trial version freely usable for 14 days.
- After the installation, an internet connection is required to receive your temporary license validation.
- Trial limitations: Software launch delay of 10 seconds. Project files cannot be read or saved. Batch encode tool is disabled. DVD-Video, DVD-VR and BDAV output is limited to 30 minutes for single file output or 3 clips at 10 minutes each for multiple file output. No user support provided. VRCopy for PEGASYS is not included.
- You can find more information regarding the use of this software by reading the included Help Manual accessible through the Help option of the software.
TMPGEnc MPEG Editor 3 Full Version 3.1.1.95
or
Need to update your software or download the full version of this software?
- You must have a valid license serial number in order to download the full version.
- If you own or have just purchased a license for this product, please login to your User Account, or create a User Account in order to download this product.
- If you want to update your software to the latest version, please follow the steps above and re-install the full version to update your software.
TMPGEnc MPEG Editor 3 System Requirement Check Tool
| File Name: | tme3_CheckExecuteEnvironment.exe |
| File Size: | Size: 369 KB (378,776 bytes) |
| Date Updated: | 2008.4.30 |
TMPGEnc MPEG Editor 3 needs specific system requirements in order to run properly. In order to help you determine if your system meets the minimum system requirements, we have created a System Check Tool that will easily tell you if your system is good to go or if it needs software and/or hardware upgrades. If you already know your system meets the minimum requirements, you do not need to download the System Check Tool.
| TMPGEnc MPEG Editor 3 Version 3.1.1.95 - April 21, 2009 | |
|---|---|
| Added | Dolby® Digital 5.1 output support (Starting from this version you cannot output multiple Dolby Digital streams at a time. Ex: When outputting with the Batch encode tool or using several instances of TMPGEnc MPEG Editor 3 simultaneously). |
| Added | AAC 5.1 channel input suppport. |
| Added | Possibility to force a given AAC source channel mode in the Property window of a clip. |
| Added | Multithread setting provides options to reduce the memory usage during the motion search (enabled by default). This option may slightly reduce the processing speed. |
| Added | Multithread setting provides source file caching options. |
| Fixed | Noise would sometimes appear at the bottom of the high-speed thumbnail picture when the source was 1920×1080 progressive. |
| Fixed | When cut-editing, a different picture would appear for a split second. |
| Fixed | MPEG-2 Audio in joint-stereo mode could not be used when outputting into BDAV format. |
| Fixed | Scene change detection would sometimes display the previous frame rather than the actual search end frame. |
| Fixed | When importing a TS file, a still picture would sometimes appear for a long time at the beginning of the video. |
| Fixed | Some specific TS files could not be read. |
| Fixed | The MPEG Tools' Advanced Multiplexer could not correctly multiplex more than two Dolby® Digital or Linear PCM streams into a file. |
| Fixed | In Dolby® Digital output, a small fraction of the audio could be lost at connection or cut-edit points, possibly resulting in an audio gap. |
| Fixed | A division by zero error would arise at the end of the re-encode analysis of added VCD materials. |
| Fixed | The application would sometimes exit on an error after importing a DVD-Video title with the Source Wizard. |
| Fixed | During an MPEG-1 System Stream and MPEG-2 Program Stream multiplexing, the right PES would sometimes not be added to the PTS. |
| Fixed | 20 bit or 24 bit Linear PCM audio in a clip would be mistakenly identified as 16 bit in the Source stage. |
| Fixed | Other corrections. |
| TMPGEnc MPEG Editor 3 Version 3.0.7.81 - September 4, 2008 | |
|---|---|
| Fixed | Using DXVA2 in a Windows Vista environment to playback a video with deinterlacing would set the framrate at 30 fps and halve the vertical resolution. |
| Fixed | AAC playback would be delayed by several dozen ms. |
| Fixed | MPEG-2 TS file could not be opened in cases of timestamp overflow. |
| Fixed | Some parts of a terrestrial digital source would wrongly be flagged with a 1:1 aspect ratio. |
| Fixed | The preview update would become slow when in overlay display mode. |
| Fixed | When importing a VOB/VRO file directly into the clip list by dragging 'n dropping, a warning window would display. Clicking the "No" button would display the warning window again. |
| Fixed | Importing several advance VBR files would raise a parameter error when accessing the Format stage. |
| Fixed | When accessing the Audio filter stage in the Clip editor, the clip information default time display would be always 0. |
| Fixed | In Preferences→Work folders→MPEG output, when the "Create an output folder named 'Project xx'" option was disabled and the "Multiple output mode file naming" option was something other than "Clip name.extension", the Batch encode tool would not check if an output file name was duplicated when registering a job in Multiple file output mode. |
| Fixed | In the Batch encode tool, when the number of Tasks was greater than 1, registering more than one project with the automatic folder creation enabled would cause the task process to fail on starting. |
| Fixed | When outputting a 16:9 file with the Batch encode tool, its thumbnail would display in 4:3 (with black bars on top and bottom). |
| Improved | MPEG-2 TS handling when the file header contains invalid data. |
| Improved | The demultiplexer tool now automatically adds the file extension to the output file name according to the input file when the output file extension is not specified. |
| Improved | The copy folder path in the Source Wizard DVD import is now a read-only field. |
| Improved | The XDVD/Advance VBR warning window in the Source stage now displays "Continue" and "Cancel" buttons instead of the "Continue" and "Close" buttons. When clicking the "Cancel" button, the status of the "Do not display this message again" checkbox is not saved. |
| Added | AAC support |
| Added | When outputting a project in Multiple file output mode and registering it to the Batch encode tool, a confirmation window now displays if a file may be overwritten. |
| TMPGEnc MPEG Editor 3 Version 3.0.5.69 - June 11, 2008 | |
|---|---|
| Improved | Validation system updated to support content-regulated network environment. |
| Fixed | In the Source Wizard DVR-MS importer's program list, pop-up information in the video list would not display correctly. |
| Fixed | In the Format stage in BDAV output mode, an error could occur when selecting the Dual channel mode in the Audio settings and then clicking on the Output stage button or the Smart-rendering analyzer button. |
| Fixed | When outputting more than two clips in MPEG format in the Multiple file output mode, the estimated remaining time could be far higher than the actual time. |
| Fixed | The progress bar in the Output stage now resets correctly when a new Project is started. |
| Fixed | Font size adjusted in the Clip editor thumbnail preview timecode display. |
| Fixed | Font size adjusted in the thumbnail GDI. |
| Fixed | When the deinterlace filter was active, moving to the next frame in the Clip editor required two clicks on the "Next frame" button instead of one. |
| TMPGEnc MPEG Editor 3 Version 3.0.4.64 - April 30, 2008 | |
|---|---|
| New | First Released Trial Version. |